There are many ways to improve the sound coming from your car speaker system. Two car amplifiers may be bridged together which will be helpful in improving the sound. For driving the big speakers this kind of system can also give a very high power. Speakers like sub woofers can be given very high power using this. The amplifiers are to be connected correctly for the first time. A wrong hook up may also lead to burning of either amplifiers or your speakers or even both. But how to bridge two car audio amps?

There are few tools required for doing this process. It includes pliers, 2 car audio amps, wire strippers, wrench, wire rated for the amplifiers. These tools will help in the accomplishment of task in a simpler way and easier way too.

Utmost care must be taken before buying the amplifiers. The manuals must be thoroughly read and must be made sure that both the amplifiers that are purchased can be bridged. If they can be bridged the amplifiers can be bought. If it is not sure then it is advised not to buy those.

Next step is to stop the power supply to the amps. Power supply to the amps can be stopped easily by disconnecting the positive cable from the battery of the car. This should be done before any connections are made. To remove the cable we may take help of the wrenches and pliers. Power supply should be completely stopped till our work is completely done .

While buying an amplifier please do check for the presence of the bridge switch. In most amplifiers it is present at the back edge of the amplifier which can be easily spotted. If it is not in bridge mode set it back to that mode. In the next step inch insulation is stripped off from the wire at both ends.

Every amp has a positive terminal and a negative terminal . For easy identification red color terminals are positive and black are for negative terminals. Next step is to make a connection between positive terminal of one of the amps with one end of the wire. The other end of the wire is attached to negative terminal of another amp. Make the connections tight by screwing the knobs. This process is called bridging of amps.

The speakers and the terminals in the bridged amplifier can be connected by the wire. The positive wire is connected to the terminal which is positive and in the same way negative is connected to the negative of the speaker.

This article would have proved to be effective in guiding us on How to Bridge Two Car Audio Amps by instructing and explaining all steps with useful suggestions and tips.

Learn more about Autozubehoer. Stop by Author Name’s site where you can find out all about Car stereo and what it can do for you.